Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Rotobrush Dryer Vent Cleaning in San Antonio: What to Know First
Independent Rotobrush dryer vent cleaning in San Antonio typically runs $139 – $289 depending on vent length, accessibility, and how much lint has packed into the line. Most jobs are finished in 60 – 90 minutes, and you get a written price before we touch the vent, not a number that grows once the technician is in your laundry room. We’re an independent Rotobrush service provider, not a manufacturer-authorized shop, which means we can use the parts and methods that actually solve your problem instead of what a corporate playbook says to do.
This page is for San Antonio homeowners who own a Rotobrush system (or inherited one with the house) and want to know what’s really happening inside that vent, what it costs to fix, and how to avoid paying twice. Call (254) 347-3897 for a free estimate and a straight answer.
How Rotobrush Products Fail – and How We Fix Them
Rotobrush builds solid equipment, but after a decade and a half of pulling lint out of San Antonio dryer vents, we know exactly where these systems show their age. Omar Haddad has seen every failure mode below more times than he can count, and each one has a specific fix that doesn’t involve replacing the whole unit for no reason.
- Rotobrush RDS-100 and RDS-200 series: clogged exhaust ports from infrequent use. These older rotary systems get sold as “set it and forget it,” so homeowners do exactly that. Lint builds up at the unit’s exhaust elbow until airflow drops to nothing. We clear the entire run with our Nikro HEPA vacuum pulling negative pressure the whole time, so the loosened lint goes into the vacuum, not back into your laundry room.
- Rotobrush e-Duct and Pro series: broken brush heads from vent misalignment. When the dryer vent shifts even half an inch out of line, the rotating brush head catches on the seam and snaps a bristle. We see this most often in San Antonio’s slab-on-grade homes where the vent runs through an exterior wall that expands and contracts with our hundred-degree summers. We source replacement brush heads from the aftermarket when they match or beat OEM quality, which keeps your cost down without cutting corners.
- Rotobrush AirRam and RotoStorm lines: failed hose connections at the vacuum port. The plastic collar where the vacuum hose attaches to the drum cracks over time, especially in garages that hit 120 degrees in August. Air leaks in, suction drops, and you’re pushing lint around instead of removing it. We replace the collar, seal the connection, and test static pressure before we call the job done.
- All Rotobrush dryer vent kits: undersized flex duct from the original install. A lot of San Antonio builders ran four-inch foil flex duct that sags, kinks, and traps lint at every low point. We reroute the vent with rigid metal duct where it’s accessible, or install a larger-diameter flex line when we have to, then verify the entire run with a camera before we leave.
- Rotobrush bird guard and vent cap failures on exterior terminations. The plastic louvers Rotobrush ships with their kits get brittle in our UV and crack within a few seasons. Birds move in, lint backs up, and now you have a nest inside your vent. We replace the failed cap with a metal louvered unit or install a proper bird guard that actually keeps grackles out of your vent line in neighborhoods like Stone Oak and Alamo Heights.
Styles & brands we work with




Our Rotobrush Dryer Vent Cleaning Process
Every Rotobrush dryer vent cleaning in San Antonio follows the same sequence, whether it’s a basic lint extraction or a full reroute. You’ll know exactly what happens before we start, and you’ll see proof after.
- 1
Call and schedule. A live person picks up at (254) 347-3897, asks about your dryer location, vent length, and what’s going on, and gives you a rough price range over the phone.
- 2
On-site inspection. Our technician arrives in uniform, introduces himself by name, and walks the vent line from the dryer to the exterior termination. We check for kinks, sags, and visual obstructions before anything gets disassembled.
- 3
Camera scope and pressure test. We send a camera through the vent to document the blockage and confirm the exact location of any damage or lint accumulation. We also test airflow at the exterior vent to measure how much restriction you’re dealing with.
- 4
Cleaning with Rotobrush and Nikro equipment. We run our rotary brush through the full length of the vent while a Nikro HEPA vacuum pulls negative pressure at the opposite end. That means the debris we loosen goes into the vacuum, not into your home. For Rotobrush owners especially, this matters because the tool itself is only as good as the extraction behind it.
- 5
Parts decision and repair. If we find a broken brush head, cracked hose collar, failed vent cap, or a vent run that needs rerouting, we show you the issue on camera and quote the fix before we do it. You approve the number, and only then do we turn a wrench.
- 6
Post-cleaning verification. We scope the vent again, show you before-and-after photos on the spot, and run one final airflow check. You get a digital invoice you can pay from your phone. If anything we fixed fails within 365 days, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterWhat Rotobrush Dryer Vent Cleaning Costs in San Antonio
Most standard Rotobrush dryer vent cleanings in San Antonio run $139 – $289. That covers a single-story home with a straight or gently curved vent run up to about 15 feet. Here’s how the price breaks down:
- Basic lint extraction, short vent run: $139 – $189
- Long or multi-bend vent run (15 – 30 feet): $189 – $249
- Vent cap or bird guard replacement: $35 – $85 added to the cleaning
- Full vent reroute with rigid metal duct: $249 – $289 plus materials when walls or roof terminations are involved
What moves the price: vent length, number of bends, roof access vs. ground-level exterior termination, and how badly the line is packed. We don’t do per-vent pricing, and we don’t quote a teaser number and inflate it at the door. The written price we hand you before work starts is the price you pay. Call (254) 347-3897 for an exact quote on your Rotobrush system.
Why San Antonio Homeowners Call Cardinal Air Duct San Antonio for Rotobrush Work
We’re part of the Relay Home Co. family, founded in 2005, and every Cardinal Air Duct San Antonio booking runs on The Relay Standard: a live trackable arrival time, before-and-after photo documentation, and a digital invoice you can pay from a link. You’ll know the technician’s name before he opens the door, because our techs are background-checked and uniformed, and we never send a stranger into your home blind.
The 365-Day Done Right Promise backs every job we do. If the work isn’t right within a full year, we return and correct it at no charge. That applies to every booking without exception, not just selected services. And while Rotobrush is the tool we’re running, our team works on dryers hooked to every major HVAC brand in San Antonio homes, including Lennox, Trane, and Carrier. One call covers the vent, the dryer, and the system behind it. Clean ducts, straight answers, real price – that’s the whole pitch.
FAQs
No. Routine cleaning with appropriate equipment does not void your Rotobrush warranty, and we use methods that are compatible with their systems. What actually voids warranties is neglect, so a documented professional cleaning done with camera evidence helps you, not hurts you. We document every inch of the vent before and after, so you have proof the work was done properly if you ever need to file a claim.
Every 12 to 18 months for most San Antonio homes. If you have a longer vent run, a two-story laundry room, or you dry multiple loads a day, every 6 to 12 months is more realistic. Our dry heat means lint stays looser and moves faster through the system, but the volume of laundry in a typical San Antonio household still packs the line quicker than people expect. We’ll give you a schedule based on what we actually pull out of your vent, not a generic recommendation.
We use both, and we’ll tell you which we recommend for your specific system. OEM Rotobrush parts are fine in many cases. For certain components like brush heads and hose collars, quality aftermarket parts often match or exceed the same spec at a lower price. You approve the parts before we install them, and every replacement carries the 365-Day Done Right Promise.
That’s usually a vent design problem, not a cleaning problem. The most common culprits in San Antonio homes are sagging flex duct, a vent run that’s too long for the dryer’s blower, or a termination cap that’s partially blocked. We’ll camera-scope the line and show you exactly where the restriction is, then quote the fix. Cleaning the same bad vent run twice without addressing the design gets you the same clog six months later. For an evaluation, call (254) 347-3897.
In most cases, yes. We carry common vent caps, bird guards, and flex duct replacements on the truck, and Omar’s crew has the experience to reroute a bad vent run on the first visit. If your vent requires roof work or a wall penetration that is beyond a standard replacement, we’ll quote it, schedule it, and give you a written price before any work starts.
Written by Omar Haddad, Owner, Cardinal Air Duct San Antonio at Cardinal Air Duct San Antonio, serving San Antonio and nearby areas.